Nearly every Miami home is built slab-on-grade, with the water and drain lines running through or under the concrete. When one of those pressurized lines develops a pinhole, the water has nowhere to go but up and out, wicking into flooring and framing for days or weeks before anyone connects the warm spot and the high water bill. The crew finds it and dries it in place.
Signs of a slab leak
A slab leak hides, so you notice the symptoms first: a warm patch on the floor from a hot-water line, the sound of running water with everything off, an unexplained jump in the water bill, or a musty smell and buckling floor.
Left alone, it saturates the slab and framing and eventually undermines the floor, so early detection saves a lot of demolition.
- A warm or damp spot on the floor
- Running-water sound with all fixtures off
- A water bill that climbs for no reason
How the crew finds and dries it
The crew locates the leak with thermal imaging and moisture meters instead of guessing, so it opens only where it must, then coordinates the plumber's repair and dries the slab and framing in place with air movers and a dehumidifier.
A slab leak is an internal pipe under the concrete, which is different from a burst supply line in the wall, and the crew finishes with verified structural drying.
- Non-destructive leak location
- Drying the slab and framing in place
- Coordination with your plumber for the repair
Warm spot or a water bill that jumped?
That can be a slab leak. The crew locates it and dries it in place. Call 24/7.
☎ Call (786) 998-2633
Why fast matters on a slab
A slab and the ground under it hold moisture and give it up slowly, so a slab leak that runs for weeks means a longer, harder dry-down and more affected flooring.
Catching it at the warm-spot stage often means drying in place rather than opening the whole floor.
Watch your water use for hidden leaks
A creeping water bill often means a hidden leak. The EPA WaterSense guide covers finding them, and the IICRC sets the drying standard the crews follow.